If you want to give your acoustic guitar a specific color, you need to know how to paint a guitar yourself. This task is not harder than refinishing any other items.
However, you may need a big amount of careful effort to get a smooth appearance. In this article, we will show you steps to paint an acoustic guitar.
- Why should you Paint Your Guitar?
- Steps to Paint an Acoustic Guitar
- Step 1: Remove the strings and hardware stuff of the guitar
- Step 2: Finish by using a sanding sponge or sandpaper
- Step 3: Smooth the body of your guitar
- Step 4: Make sure you paint in an environment that is free of dust
- Step 5: Apply the tape of the painter
- Step 6: Let’s paint
- Step 7: Final touch to your guitar
Why should you Paint Your Guitar?
You can remove dings, scratches, as well as dents from your guitar after repainting it. Besides removing the scratches, painting your instrument also can make it look new. However, some people may get bored with the way their instruments look, and they may want to change their color.
Things You Need
To pain your acoustic guitar yourself, you need to prepare some important things as below:
- A guitar
- Painter’s tape
- Painter’s Touch spray paint
- Newspaper or plastic
Steps to Paint an Acoustic Guitar
Step 1: Remove the strings and hardware stuff of the guitar
It is possible to clip your guitar’s strings away. You can also use a screwdriver to detach the output jack, bridge, pickups, strap buttons, knobs, as well as pick guard. It is essential to readjust the truss rod when you assemble your instrument again.
Step 2: Finish by using a sanding sponge or sandpaper
It is not easy to reach curved areas with the orbital sander. Therefore, you can make use of a small sanding sponge. Besides, you can also use a free sandpaper folder around a big dowel.
Step 3: Smooth the body of your guitar
After you remove the finish by using coarse-grit sandpaper, it is time to smooth out the wood. To do this, you can use finer grains of sandpaper. Operate the entire guitar overusing the medium-grit sandpaper. After that, use fine-grit sandpaper to go over it one more time.
Step 4: Make sure you paint in an environment that is free of dust
There are a lot of air particles outdoors. They include bugs attached to the odor. Moreover, there are different air particles in nature. They include bugs attached to the scent.
Step 5: Apply the tape of the painter
There may be some areas where you don’t want to paint. You can apply the painter’s tape to them.
Step 6: Let’s paint
First, you should sake the painter spray paint can for one minute. It is essential to do this after you mix the ball. This step is to make sure you get a well-mixed color. After that, spray the paint onto your instrument. You will need from two to three light coats for optimum coverage. Moreover, remember to give some time for these coatings to dry to get the expected results.
Step 7: Final touch to your guitar
After you spray the final coat of paint, you should let your instrument dry. It is essential to let it dry for about twenty minutes before you move the tape of the painter. The paint will fully get dry in one day.
Painting your guitar requires a lot of work. It is related to sanding and waiting. You may have to take a few days to do this task. However, you still should do it. Now, you got all the steps to paint an acoustic guitar. Follow these steps. Then, you will get an acoustic guitar with a good appearance. We hope our guide helped to make your work easier.